Product Overview
Rappelling and rescue work call for rope selected for the task, not general-purpose utility cord. Rothco SWAT Rappelling Ropes use a static design with high-tensile nylon cord and a braided poly sheath, combining a load-bearing construction with an outer layer that resists abrasion, heat, and chemicals. These USA-made ropes are intended for civilian and governmental rescue teams as well as tactical applications.
Static construction for rappelling and rescue
Static rope is generally chosen where limited stretch is important, such as controlled descents and rope-based rescue work. That makes this a different category of equipment from dynamic climbing rope, which is intended to absorb the energy of a climbing fall. Select your rope according to the activity and the requirements of the complete system rather than relying on strength alone.
The rope measures 7/16 inch in diameter, an important specification when matching it with descenders and other rope-handling equipment. Check the accepted rope diameter and type for each component you intend to use. Length selection also matters: allow for the intended route and the rope required by your rigging arrangement.
A protective sheath around high-tensile nylon
The braided poly exterior helps protect the nylon cord from abrasion and exposure to heat and chemicals. Abrasion resistance is particularly relevant where rope contacts surfaces during handling or use, though resistance does not make the rope immune to damage. Inspection and appropriate handling remain important parts of rope care.
- Manufacturer-listed strength: 7,660 pounds.
- Standards information: Rothco identifies the rope as meeting OSHA, ANSI, and NFPA standards.
- Country of manufacture: USA.
For rappelling or rescue use, confirm that the selected rope meets your team's equipment requirements and follow qualified instruction. Do not use the listed strength alone to determine a safe working load.
